Gravity have extended their Gravity Light range of products to include pedals, chain devices and even head set pre-load caps!
For 2011 the range has been subtally revised and lightened all topped of with a new graphic - here is a round up of all the parts first seen at the Eurobike/ Interbike and London shows.
Gravity Light Mega Exo crank set
Hollow Forged crankarms result in superior strength and stiffness and a higher strength-to-weight ratio compared to solid arms.
Specification:
Hollow-forged AL6061/T6 crankarms - 24mm integrated CrMo spindle - CrMo pedal inserts- CrMo chainring bolts. MegaExo BB - Single row cartridge BB bearings - Alloy external bearing cups. Translucent polycarbonate bashguard.
Sizes: Compatible with 68/73mm or 83mm BB shells - Lengths: 165, 170, 175mm.
Colour: Black anodized.
Weight: 950g inc BB.
SSP: £219.95
Gravity Light Stem
Re-designed with smoother lines, without losing the high strength to weight ratio.
Specification:
3D forged AL2014/T3 oversize body - 4-bolt CNC AL2014/T3 front clamp - CroMo hardware.
Lengths: ±6° x 45, 60, 75, 90mm – 1.5 x 50mm - Clamp: 31.8mm.
Weight: 145g (L45mm).
SSP: £54.95
Gravity Light Handlebar
New 15 degree set back angle that puts the bar in a more natural riding position.
Specification:
Triple butted and tapered AL7075/T6 - Shot-peened to increase surface hardness - Black anodized with laser logos.
Sizes: 9° Back sweep x 4° up sweep x 15° set back (710mm) - 9° Back sweep x 6° up sweep x 15° set back (800mm).
31.8 x 25mm rise x 710mm width - 31.8 x 40mm rise x 710mm width - 31.8 x 25mm rise x 800mm width.
Weight: 273g (25 x 710mm).
SSP: £64.95
Gravity Light Seat Post
New slimmer DATA head, which no accepts 8mm rails and 60mm of angular adjustment.
Specification:
One piece forged AL2014 with quad butting - Zero set back DATA head - M5 CroMo hardware - Hard anodized with CNC finish and laser logos.
Diameters/Lengths: 27.2 x 350mm, 30.0 x 350mm, 30.9 x 350mm, 31.6 x 350mm.
Weight: 283g.
SSP:£54.95
Gravity Light Pedals
Based on a Norglide sealed bushing mechanism, the gravity pedals also use a unique EN HT spindle that is significantly stronger than normal chromoly spindles.
Specification: Extruded and machined AL6061 cage - SNCM HT Chromo spindle - Norglide teflon bushings - 6mm traction pins - 9/16" x 24 Tpi x 16mm think profile - Black anodized - Laser graphics.
Weight: 449 grams (pair).
SSP: £159.95
Gravity Light Wheels
Multi use free ride/ all mountain wheelset, hand built and built to last.
Specification:
6061/T6 sleeve-jointed rim with stainless eyelets - black anodized and color graphics - 32mm wide x 12mm deep. Direct pull hubs with cartridge bearings - CNC anodized black with laser logos - steel freehu - ISO rotor bosses. 2.3mm Sapin "Strong" black spokes and Brass nipples.
Hubs: Front – 110x20mm TA, Rear - 135mm QR or 150x12mm TA.
Weight: 2.5kg.
SSP: £439.95
Gravity Light Chain Device
New race designed chain device with integrated guard.
Specification:
Dupont Hytrel high-impact composite material for guides and guard - CNC Alloy boomerang - Adaptable to non-ISCG frames - Single bolt adjustment for upper and lower guides.
ISCG or ISCG05 - Compatible with 36T or 38T rings.
Weight: 253g.
SSP: £139.95
Gravity Light top cap
New laser etched logo to complete the Gravity Light family look. Also available as a 'Whip Cap' with access hole and unique star nut to enable the front brake cable to pass through the fork steerer tube.
Specification: Forged alloy top cap - Chromoly bolt - Black anodised - Laser graphics.
Sizes: 1-1/8" and 1.5".
Weight: 28.1g.
SSP: £11.95
Gravity components are used by Ben Boyko, Andrew Taylor, Kelly McGarry, Dave Smutok, Randy Spangler, Phol Sundbaum, Erid Poter, Chris Van Dine, Darcy Turenne
For more information please vist:
www.ridegravity.com
