Rider Run Co to distribute MDE Bikes

Rider Run Co are now distributing MDE full range of Bikes. All MDE frames are handcrafted in Italy, using TIG welding and CNC parts for supreme strength and light weight. Frames are then finished to customer specs either in powder coat (any colour from the RAL/Pantone range available) or anodized (at extra cost). Picture to the right is the '69' frame which looks pretty sweet. Check out the spec below: - 200mm rear travel - Easton Fs Rad tube set - fully cnc - Progressive compression ratio - High stability under acceleration - Low pedal feedback - Stays level under braking - High stiffness in the pivot area with one piece cnc block. - Weight 4.15 Kg with Fox Dhx 5.0 coil - Three sizes available S,M,L - Rear dropouts completely replaceable and available 5 versions:135mmx10mm standard quick release, 135mmx12mm with Maxle system, 135mmx12mm with tightening screw, 150mmx12mm with Maxle system, 150mmx12mm with tightening screw - Hard anodized 7075 T6 aluminium pivot - Long life specific "Enduro bearings" - Icgs 00 or Icgs 05 - Big tyre clearance 26x3.0 - FINISH:POWDER COATING OR ANODIZED - PRICE: 1525GBP All frames are custom order only, with delivery between 4-6 weeks. For more information please visit www.rideruncompany.co.uk