First Look - Sram X0 Hubs

Check out this great first look at the all new X0 jubs from Sram. Bult for the toughest all mountain terrain and proving that solid doesn't mean slugish!

STOP AT NOTHING

Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn’t mean being sluggish. From pawl tooth to side cap, we went the extra mile on the X0 Hub—so you have less to worry about on the trail. DOUBLE TIME™ ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise SPEEDBALL™ bearings mean lower resistance, faster revolutions and no more time spent readjusting play.

STOP AT NOTHING

• Versatile hub – light enough for XC, strong enough for All-Mountain
• New DOUBLE TIME ratchet mechanism for durable, quick engagement
• SPEEDBALL precision cartridge bearings for light, smooth action. No play adjustment needed for simplicity and convenience.
• 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes
• Convertible to all axle types, except DH
• Available in XD or 10-sp driver body
• Available in 32 or 28 holes
• Sand-blasted black with red label
• Glossy black with silver accents
• Weight: 130g (front), 250g (rear)

AVAILABLE DECEMBER 2013

MSRP

Component - USA - Europe

X0 hub Front - $197.00 - €181,85

X0 hub Rear - $364.00 - €336,00

Technology

DOUBLE TIME™

Ratcheting up the smarts. This straight-aligned, 4-pawl design turns the 26-tooth ratchet ring into 52 points of engagement. The result: smooth 6.9-degree engagement without reducing tooth size or offsetting internal geometry—which means serious long-term durability.

SPEEDBALL™

The only adjustment they’ll ever need was made back at the factory. Every part of the ball bearing is carefully manufactured —which means that each bearing bore can be precision machined to fit the bearing race exactly. With tolerances this tight, the days of adjusting play after every ride are over.

SEEKER™

Get unbent. 3D forged and machined for lightweight strength, the flanges are angled towards the rim—allowing the spokes to be fully in-line when tensioned. The result: reduced spoke head breakage and better overall durability.

SIDE SWAP SYMMETRICAL™

Switching axles has never been easier. Threadless side caps can be installed and replaced by hand—no tools necessary. SIDE SWAP SYMMETRICAL side caps refuse to take sides. The left side cap is identical to the right one. No need to figure out where each cap is going.

XD™

XD is a driver body design that allows the use of the SRAM 1X™ 10-42 Cassette and provides an improved interface.  

RELENTLESS

To be the best. It’s why you ride. It’s why we build components. The perfect combination of precision and brute force. No obstacles stopping us. No limitations slowing us down. Ours is a relentless pursuit: to make the climb shorter, the trail smoother, the turn tighter, the descent faster. To give you the strongest, lightest, quickest bike on earth. To be the best.

Latest news

New Spot: Abergele Pump Track
New Spot: Cadishead Pump Track
Watch: Down For Life - 30 Years of Bicycles & Dirt
Watch: Matt Jones returning to oversee the reconstruction of Woburn Bike Park
New Spot: The Murrough Pump Track

Popular news

Review: Shimano Saint PD-MX80 Pedals
Rockshox Announce 2014 Sid, Revelation, XLoc and updates to the Monarch
Review: Maxxis Ikon 26x2.35 Tyres